you can change the oil, add fuel stabilizer, and use fogging oil.
You can also flush the engine and check the propeller.
Oil Change the crankcase oil and filter
Change the lower unit gear oil
Run the engine for a few minutes before changing the oil
Fuel
Fill the tank with fresh fuel
Add fuel stabilizer to prevent varnish buildup
Replace the filter element in your fuel filter-water separator
Fogging oil
Spray fogging oil directly into each cylinder while the motor is still warm
Fogging oil protects the internal surfaces of the carburetor and the cylinders
Flushing
Flush the engine to remove any salt buildup or general mud and grime
Screw a garden hose into the motor flushing port, turn on the water, and let the water run for approximately 5 minutes
Other steps Remove the spark plugs, Add anti-freeze to the outboard, Check the propeller, and Apply corrosion guard to exposed parts.
CONTACT US FOR MORE:
JOHN OLAYINKA ALEGBELEYE
+2347025178785
OITHA MARINE
email: md@oithamarine.com
www.oithamarine.com
Recent Comments